Njflex Wheel And Tyre Centre.

The lathe machine has five different components – the headstock; tailstock; cutting tools, such as the gouge, skew chisel, round chisel, narrower spear and the finishing utensils; carriage and spindle.

Shaping and smoothing wood can be done with a lathe machine A lathe craftsman or machinist will use a lathe to customize and create wood products. Lathes help people carve wood to create decorative designs, furniture parts like table legs, baseball bats, cue sticks and other cylindrical wooden items. Lathes are also available that are designed for working on other materials, such as glass and different metals. If you want to operate a lathe properly and be aware of when the spindle is in need of repair and how to maintain the machinery, it is important to be familiar with all the different parts.

The Headstock

The headstock of the lathe machine is used to anchor and hold the upper end of the spindle in place. This is also the housing for the engine that spins the wood. The back of the headstock has a number of pulleys and gears which can be adjusted to alter the speed of the spindle’s rotation. A high-tension spring or chuck keeps the wood piece steady and in place so that it does not fall or move when the spindle starts rotating.

Tailstock

There is a tailstock which holds the wood tight and this is part of the machine. The center can rotate along with the wood or can remain fixed in place. The rotating mechanism or live center contains the bearings that enable it to move.

You will require cutting tools like the gouge, skew chisel, round chisel, narrow spear and also finishing tools

Different types of cutting tools on the lathe machine can be attached on the basis of project type undertaken. A gouging tool is widely utilized as an implement for removing excess wood. Use the skew chisel in order to make all the fine details much more pronounced. Round chisels and small spears give them intricate finishing. The rounded edges of finishing tools are ideal for buffing the wood because they prevent over-slicing of material.

The Carriage

The lathe’s cutting tool is held in place by the carriage which allows the craftsman to work. The carriage is made up of 5 different components and include the compound rest, cross-slide, apron, tool rest and the saddle. These components work together to allow the cutting tool to be slid into place.

Spindle mechanism

Lathe spindles have 3 configurations. All these three models are interconnecting and related. Attaching the chuck to a threaded model is complex, as the threaded model’s configuration is old and the model doesn’t have a taper Spindles of the cam-lock variety have cam studs at one end which slide into a ring with similar holes. After the chuck key is turned, the studs lock in place. The third configuration, the tapered spindle, narrows at the tip and has a threaded collar with a built-in chuck key.

With the advent of the lathe machine, craftsmen find it far easier, faster and less physically taxing to create and complete wood projects of any kind. Lathe machines can be very helpful for more accurate works by craftsmen.

For issues with your lathe machine and / or any associated parts, or if you require assistance with spindle repair, please see http://www.motorcityrepair.com/SpindleRepair.html.